High Output Sports Lighting

Light up your sports field like the pros and make your games more exciting with better lighting with these fully RGB LED fixtures.

GLASS SINGLE OPTIC LED

With our patented design, we get bright light without producing unacceptable levels of glare. That's physically impossible with other fixtures because their single-lens approach doesn't distribute evenly over 50k sq inches like ours does! We eliminate any glare from the LED lights by bunching them closely together and not using plastic lenses. You can see that each individual LED has been mixed successfully, with no visible dots of un-mixed color to distract your eye!
These are some of the problems with other fixtures

Heat control

The other LED sports fixtures cannot control heat. They have to separate LEDs in order for them not emit too much of it and cause damage or burning out your fixture!

Light control

When LEDs are not separated, they can only be controlled individually by plastic lenses.

Light warps and cracks

The light is forced through plastic that acting like a greenhouse, warps and cracks in the sunshine.

Inevitable glare

Glare from LED lighting is inevitable when lights are too bright or inefficient lenses used to distribute light.

We keep it cool!

These lights use active cooling which prolongs lifespan as well reduces weight while allowing for mounting at any angle or height without needlessly increasing ambient temperature range! Using military grade fans will ensure durability in even harsh weather conditions with an industry leading 490k+ hours mean time before failure.
01.

AMBIENT AIR IS DRAWN IN

The fan in the rear is intelligently controlled to pull ambient air in at a rate that maintains consistent temperature. If it’s colder outside, it spins slower. If it is warmer, it moves faster.
02.

FINS DRAW OUT HEAT

Heat from the light and drivers flow to the fins. Air drawn in from the fan carries it out of the the fixture.
03.

CONTINUOUS COOLING

And on it goes. Sometimes air is flowing fast and sometimes slow. But all the sensitive components are kept a comfortable 70° C.




CONSTANT TEMPERATURE

The intelligent active cooling system of our product not only maintains consistent temperature for LEDs and circuit boards, but also ensures that their life cycle is prolonged.

OVER 490,000 HOURS MTBF

Our fans have been around for decades and they're still going strong. With an average MTBF rate over 490,000 hours you can bet that your system will be up-and running whenever it's needed most!

OVER 40% WEIGHT REDUCTION

We make our fixtures as lightweight and unencumbered by big metal hulking around, which means there's little to no modification needed for installation.



WIDER OPERATING RANGE

Our fixtures can operate in a wider range of environments, from extreme heat to bone-chilling cold.

AIM IN ANY DIRECTION

The passive heatsink has to be aimed in a specific direction for airflow. Our lights, however operate anywhere from horizontal or vertical so that you can use them with maximum versatility!

MONITORING INTELLIGENCE

The intelligent system built into our fans will automatically monitor and log the speed, temperature of your room.


There is more than one reason to get these sports lighting fixtures. 

Contact us now to get a free assessment on your project. 

Get my pricing

COLOR TUNABLE WHITE

GLARE-FREE

ADVANCED INTELLIGENCE