Cross Arms Pole

The aluminum pole shaft will be made of a seamless, extruded tube 6063 alloy per the requirements set by ASTM B221. After being heat treated for full length and base welded to provide T6 tempering it’s ready!

Base Style

4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers (Alloy 356-F) and Stainless Steel Hex Head Attaching Screws.

Handhole

The pole shaft will be constructed of high quality aluminum, per your specifications. The 6063-series is designed to meet the requirements for both strength and corrosion resistance in marine environments; it’s not only lightweight but also durable! It’s important that this part has been fully treated after being welded at its base so you can enjoy years without worry about rust ruining any aspect on our project–especially if there are saltwater rivers nearby (which sometimes happens). And don’t forget all those safety features too: 7″+ Butt Diameters + Reinforced Frame containing a tapped 3/8″ Grounding Provisions

Anchorage

This pole shaft will be constructed of seamless extruded tube-like material per the requirements set by ASTM B221. The resulting product is full length heat treated after base weld to produce a T6 temper, 7 inch+ butt diameter -reinforced with 4×6 cast aluminum frame (alloy356) which holds two screw heads at each end for attachment onto doors or other objects you want fastened securely in place!

Vibration Damper

We will install a vibration damper if needed. You can also request for it to be installed by us at the factory, just let me know what you want!

The aluminum pole shaft will be made of a seamless, extruded tube 6063 alloy per the requirements set by ASTM B221. After being heat treated for full length and base welded to provide T6 tempering it’s ready!

Embed Detail

The buried pole bottom section on 6″+ butt diameter poles will be partially flattened into an anti-rotational, oval cross section. Wire access is provided 24 inches below ground line and soil conditions vary by site so foundation requirements should be determined with qualified expertise in determining what’s best for your job lot!

Handhole

The pole shaft will be constructed of high quality aluminum, per your specifications. The 6063-series is designed to meet the requirements for both strength and corrosion resistance in marine environments; it’s not only lightweight but also durable! It’s important that this part has been fully treated after being welded at its base so you can enjoy years without worry about rust ruining any aspect on our project–especially if there are saltwater rivers nearby (which sometimes happens). And don’t forget all those safety features too: 7″+ Butt Diameters + Reinforced Frame containing a tapped 3/8″ Grounding Provisions

Vibration Damper

We will install a vibration damper if needed. You can also request for it to be installed by us at the factory, just let me know what you want!