StormGuard Small

It depends on what is present in your space.

• Class I: flammable gases or vapors
• Class II: combustible dusts
• Class III: fibers or flyings Division 1 means the hazard is present during normal operations, while Division 2 means it is only present occasionally. If you are unsure, we can review your environment or drawings to match the right fixture with your area classification.

Yes. LED hazardous fixtures offer longer lifespan, higher efficiency, and far less maintenance. They hold up to vibration, moisture, corrosion, extreme temperatures, and misuse. LEDs also eliminate warm-up times and reduce the need to enter dangerous areas for frequent re-lamp and ballast replacement.

You should look for UL, ETL, CSA, or IECEx certifications, depending on your facility’s requirements. Important markings include Class/Division ratings, Temperature Codes (T-Codes), IP66 or higher, and impact ratings like IK10. These ensure the fixture meets strict safety standards for your specific environment.

The T-Code tells you how hot a fixture gets during operation. Every hazardous environment has a maximum allowed surface temperature. Choosing a fixture with the correct T-Code ensures it will not ignite the gases, vapors, or dust present in your facility.

Yes, they must be installed following NEC, OSHA, and local code requirements. Hazardous fixtures cannot be opened or serviced while energized. The good news is that LED options significantly reduce maintenance because there are no lamps or ballasts to replace. Once installed, they provide long-term, trouble-free performance with minimal servicing.