We are hiring! 💼
☎️ 832-459-4447
BH63-004-Side-re-25p-308x400
BH63-006-Side-re-25p-424x400
BH63-008-Side-re-25p
BH63-009-Side-re-25p-495x400
BH63-010-side-re-25p

Smart And Connected

Lifetime Warranty

Expert Installation

Google Rating
5.0
Based on 39 reviews
js_loader
See all reviews

Bullhorn Arms Pole

LED Area/Site Lighting

Bullhorn Arms Pole National LEDBullhorn Arms Pole National LEDBullhorn Arms Pole National LED

 

 

National LED’s aluminum poles are an excellent choice for outdoor lighting. They come in various designs, such as Double 180° and Triple 120 ° to name just two of their options that meet your needs when it comes time to set up the perfect town or countryscape! For further customization National LED can provide custom arms made specifically according with what you’re looking achieve.

Request a Quote

Get a data sheet

Download data sheet
Unfortunately, we haven't attached data sheet yet. We'll be in contact with you.

Anchorage Options

4-Bolt Base
T-Base
Direct Buried
Pole

    The aluminum pole shaft will be made of a seamless, extruded tube 6063 alloy per the requirements set by ASTM B221. After being heat treated for full length and base welded to provide T6 tempering it’s ready!


Base Style

    4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers (Alloy 356-F) and Stainless Steel Hex Head Attaching Screws.


Handhole

    The pole shaft will be constructed of high quality aluminum, per your specifications. The 6063-series is designed to meet the requirements for both strength and corrosion resistance in marine environments; it’s not only lightweight but also durable! It’s important that this part has been fully treated after being welded at its base so you can enjoy years without worry about rust ruining any aspect on our project–especially if there are saltwater rivers nearby (which sometimes happens). And don’t forget all those safety features too: 7″+ Butt Diameters + Reinforced Frame containing a tapped 3/8″ Grounding Provisions


Anchorage

    This pole shaft will be constructed of seamless extruded tube-like material per the requirements set by ASTM B221. The resulting product is full length heat treated after base weld to produce a T6 temper, 7 inch+ butt diameter -reinforced with 4×6 cast aluminum frame (alloy356) which holds two screw heads at each end for attachment onto doors or other objects you want fastened securely in place!


Vibration Damper

    We will install a vibration damper if needed. You can also request for it to be installed by us at the factory, just let me know what you want!









Pole

    The aluminum pole shaft will be made of a seamless, extruded tube 6063 alloy per the requirements set by ASTM B221. After being heat treated for full length and base welded to provide T6 tempering it’s ready!


Base Style

    4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers (Alloy 356-F) and Stainless Steel Hex Head Attaching Screws.


Handhole

    The pole shaft will be constructed of high quality aluminum, per your specifications. The 6063-series is designed to meet the requirements for both strength and corrosion resistance in marine environments; it’s not only lightweight but also durable! It’s important that this part has been fully treated after being welded at its base so you can enjoy years without worry about rust ruining any aspect on our project–especially if there are saltwater rivers nearby (which sometimes happens). And don’t forget all those safety features too: 7″+ Butt Diameters + Reinforced Frame containing a tapped 3/8″ Grounding Provisions


Anchorage

    This pole shaft will be constructed of seamless extruded tube-like material per the requirements set by ASTM B221. The resulting product is full length heat treated after base weld to produce a T6 temper, 7 inch+ butt diameter -reinforced with 4×6 cast aluminum frame (alloy356) which holds two screw heads at each end for attachment onto doors or other objects you want fastened securely in place!


Vibration Damper

    We will install a vibration damper if needed. You can also request for it to be installed by us at the factory, just let me know what you want!





Pole

    The aluminum pole shaft will be made of a seamless, extruded tube 6063 alloy per the requirements set by ASTM B221. After being heat treated for full length and base welded to provide T6 tempering it’s ready!


Embed Detail

    The buried pole bottom section on 6″+ butt diameter poles will be partially flattened into an anti-rotational, oval cross section. Wire access is provided 24 inches below ground line and soil conditions vary by site so foundation requirements should be determined with qualified expertise in determining what’s best for your job lot!


Handhole

    The pole shaft will be constructed of high quality aluminum, per your specifications. The 6063-series is designed to meet the requirements for both strength and corrosion resistance in marine environments; it’s not only lightweight but also durable! It’s important that this part has been fully treated after being welded at its base so you can enjoy years without worry about rust ruining any aspect on our project–especially if there are saltwater rivers nearby (which sometimes happens). And don’t forget all those safety features too: 7″+ Butt Diameters + Reinforced Frame containing a tapped 3/8″ Grounding Provisions


Vibration Damper

    We will install a vibration damper if needed. You can also request for it to be installed by us at the factory, just let me know what you want!









Frequently Asked Questions

Can I customize or program LED lights to create lighting effects?
LEDs can be programmed to create dynamic lighting effects that enhance the game-day experience for everyone involved and can provide superior lighting for playing fields and arenas, improving visibility for athletes and spectators alike.
One of the biggest benefits of commercial LED lighting is the decrease in energy costs. Traditional incandescent and metal-halide lights can use up to four times as much energy as commercial LED lights. This decrease in energy consumption not only saves money, but also helps reduce your facility’s carbon footprint.
Commercial LED lights also last much longer than traditional lighting options. While incandescent bulbs typically only last around 1,000 hours, commercial LED lights can last up to 100,000 hours. This not only reduces maintenance and replacement costs, but also reduces the amount of time your facility needs to be dark while lights are being replaced.
Another key benefit of commercial LED lighting is increased safety. Because commercial LED lights produce ve ry little heat, there is less risk of fire hazards. Additionally, commercial LED lights can be designed with specific light patterns that can help improve visibility for athletes and spectators alike. This improved visibility can help prevent accidents and injuries on the playing field or in the stands.

Similar Commercial LED Lighting Products

_MG_2130

OFS LED Stadium Light

striker-Sports-LED-light

STRIKER Series LED Sports Lighting

pgg1-1

PG G1

products-pgg2-1_1

PG G2

plg1-1

PL G1

product-pgl-g1-1

VPG G1

arg1-4

AR G1

wsa-g2-1

WSA G2

weg1-3

WE G1

product-lchg1-2

LCH G1

wfg3-4

WF G3

wfg1-3

WF G1

Fill out this form to be contacted in
15 minutes or less
Follow us:
Youtube Linkedin Tiktok Instagram

National LED is focused on being a leader in the LED industry by having the longest lifetime products with the strongest warranty.

Useful links

National LED

  • 6721 Portwest Dr
    Houston, TX 77024
Google Rating
5.0
Based on 39 reviews
js_loader

Give us a review!

©2004 - 2023
National LED | All Rights Reserved

Request a Quote for Bullhorn Arms Pole